Car Body Parts Store

Plymouth Conquest Engine & Drivetrain

We are committed to bringing you the best Plymouth aftermarket and OEM replacement Car Body Parts for your Plymouth car, truck or sport utility vehicle.

When you want good quality Plymouth Conquest Car Body Parts, you need to come here to find what you need to get your Plymouth vehicle in shape again. You will find all the Plymouth Conquest Car Body Parts.

You will be totally satisfied with your online experience and the quality of the Plymouth Conquest Car Body Parts. You will find the best Plymouth Conquest Car Body Parts discounts with the highest standards.

We will make certain that when you buy any Plymouth Conquest Car Body Parts, you will have a very pleasant experience.

The Plymouth Conquest Car Body Parts that we sell include A/C Condenser Fan, A/C Condenser, Camshaft Position Sensor, and Spoiler Bracket Pad. You will surely be able to find the Air Cleaner Assembly, Mass Air Flow Sensor, Heater Pipe Line, or the Sway Bar Kit that you are in need of.

Most Popular Plymouth Conquest Engine & Drivetrain

Plymouth Conquest  Battery		Plymouth Conquest  Crankcase Breather
Zoom In Description: OPTIMA BATTERY, YELLOWTOP BCI Group 31T, 12 Volt, 900 Cold Cranking Amps, 155 Minutes Reserve Capacity, 12-13/16 in. x 6-1/2 in. x 9-3/8 in., 59.8 lbs., Dual SAE And 5/16 in. Stainless Steel Stud Posts, Deep Cycle Battery For Extreme Applications, Low Internal Resistance Allows For Better Sound Quality, No Gassing Or Unpleasant Smells, 100% Spill Proof, Features Solid Molded Cell Connections For Increased Durability, Self-Sealing Safety Valves, Impact Resistant Polypropylene Case, High Purity Lead Grids For Long Life, Corrosion Resistant Terminals, Rugged Spiracell Construction Provides Maximum Vibration And Extends Product Life, Absorbent Glass Mat Separator Holds Electrolyte Like A Sponge To Eliminate Acid Spilling, With Optima's Limited 1-Year Warranty Fits: Universal (Any Vehicle)   Brand: Optima Part No: O108052161 Retail Price: $249.99  Discount Price: $234.92		Description: K&N STEEL BASE CRANKCASE VENT FILTER WITH DEFLECTOR SHIELD Flange OD 3, Height 2.5, Flange ID 0.75, Length 0.875 in., Designed To Push Into The Existing Rubber Breather Grommets, Comes With A Chrome-Plated Shield And Top Plate For Beauty And Durability, Also Includes A Zinc-Plated Base Plate Fits: Universal (Any Vehicle)   Brand: K&N Part No: K33621519 Retail Price: $35.73  Discount Price: $23.00
Plymouth Conquest  Ignition Coil		Plymouth Conquest  Spark plug Wire Terminal
Description: AEM CDI SHORT PENCIL SINGLE COIL KIT 5.72 in. Overall Coil Height, 5.64 in. Total Length, 3.85 in. Spark Plug To Bottom Of Coil Mating Connector Height, 0.74 in. Coil Mating Connector Height, Two-Wire CDI Compatible Coil, Compatible With All Standard Automotive Spark Plugs Including Threaded Tip Style, Allows Easy Conversion To Coil-On-Plug Ignition Systems, Works With Aftermarket Engine Management Systems, Increases Spark Energy That Can Be Seen Over Factory Smart Coils When Used In High-Boost, High-RPM, Or High-Compression Applications, Kit Includes Pencil Coil, Connector, Connector Pins, Pin Lock, And Weather Seals, Must Be Used With CDI Ignition Module, Legal In California Only For Racing Vehicles Which May Never Be Used On A Highway, With AEM's Limited 1-Year Warranty Fits: Universal (Any Vehicle)   Brand: AEM Part No: A18302850 Retail Price: $92.20  Discount Price: $66.38		Description: TAYLOR CABLE 90 DEGREES SPRING LOCK SPARK PLUG TERMINAL, BLUE, 50 PIECES Complete Boot/Terminal Kits And Bulk Packages For Engine Builders, Constructed To Withstand High Temperatures, Features Vibration Proof Design For Superior Durability, With Manufacturer's Limited 90-Day Warranty Fits: Universal (Any Vehicle)   Brand: Taylor Cable Part No: T6444409 Retail Price: $10.75  Discount Price: $7.62
Plymouth Conquest  Battery Relocation Kit		Plymouth Conquest  Ignition Coil Wire
Description: TAYLOR CABLE RELOCATOR KIT, SINGLE TRUNK MOUNT Reduces Engine Compartment Clutter, Provides Better Weight Distribution For Improved Traction Stability, Factory Crimped Terminals On 100% Copper Cables, 16' Red 2 Ga. Cable, Battery To Starter, 20 Black 2 Gauge Cable, Battery To Ground, 13" X 7.25" Heavy Gauge Coated Steel Tray, 3/8" J Bolts And Hold Down With Installation Hardware, Contains 1 Gauge Welding Cable, With Taylor Cable's Limited 90-Day Warranty Fits: Universal (Any Vehicle)   Brand: Taylor Cable Part No: T6448020 Retail Price: $197.53  Discount Price: $114.58		Description: ACCEL UNIVERSAL IGNITION COIL WIRE, YELLOW 8 mm, 60 in. core L; Complete with dielectric grease, crimp tool, and anvil; Includes silicone lube, boots and terminals for a 90 degree male tower, 90 degree female tower, and straight points female tower; Great for replacing a single damaged wire; Engineered with carbon/graphite cores; Replacement for one wire; With 1-year Accel limited warranty. Fits: Universal (Any Vehicle)   Brand: Accel Part No: A35170500 Retail Price: $15.83  Discount Price: $8.73
Plymouth Conquest  Catalytic Converter		Plymouth Conquest  Carburetor Jet
Description: CATCO PRE-CAT 9500 SERIES CATALYTIC CONVERTER ASSEMBLY CATCO'S PRE-CAT 9500 SERIES CATALYTIC CONVERTERS ARE DESIGNED WITH 409 STAINLESS STEEL PIPES AND SHELL FOR LONGER LIFE. SPECIFICATIONS WITH ONE AIR TUBE PROVISION OVAL BODY 17 IN. L X 4 IN. W X 7.25 IN. H 2 IN. INLET DIAMETER 2.5 IN. OUTLET DIAMETER DUAL INLET AND SINGLE OUTLET CONFIGURATION NOTES 49-STATE LEGAL; NOT FOR SALE OR USE IN CALIFORNIA; CANNOT BE SHIPPED TO CALIFORNIA ADDRESSES Fits: Universal (Any Vehicle)   Brand: Catco Part No: CAT9508 Retail Price: $164.21  Discount Price: $131.37		Description: JET CHIPS PERFORMANCE QUADRAJET PRIMARY CARBURETOR JET Size 0.075; A high quality Quadrajet primary carburetor jet; With Jet Chips' limited 30-day return policy. Fits: Universal (Any Vehicle)   Brand: Jet Performance Part No: J20201075 Retail Price: $8.95  Discount Price: $6.71
Plymouth Conquest  Ignition Module Mount		Plymouth Conquest  Ignition Module Mount
Description: MALLORY IGNITION MODULE MOUNT KIT, RUBBER, BLACK, SET OF 4 Number 10 thread, vibration ignition box mount style; Designed to absorb vibration in oval track racing, drag racing, off road, and marine applications. Fits: Universal (Any Vehicle)   Brand: Mallory Part No: M1129069 Retail Price: $30.14  Discount Price: $22.15		Description: MALLORY SHOCK MOUNT KIT, SET OF 4 1/4 x 20 thread; Includes hardware; Designed to absorb vibration in oval track racing, drag racing, off road, and marine applications. Fits: Universal (Any Vehicle)   Brand: Mallory Part No: M1129070 Retail Price: $31.73  Discount Price: $20.88
Plymouth Conquest  Carburetor		Plymouth Conquest  Fuel Fitting
Description: JET PERFORMANCE STAGE 1 ROCHESTER QUADRAJET CARBURETOR, REMANUFACTURED, SOLD INDIVIDUALLY 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; 750 CFM; 4-barrel; Single inlet; Spread bore flange style; Electric choke; Gasoline fuel type; Air valve secondary type; Reassembled using the highest quality components with a new float, choke pull-off, and bronze bushed throttle shafts; Casting plugs are sealed with epoxy to prevent leak-down into the intake manifold; All circuits are checked for proper sizing and the calibration is checked for proper jets, primary and secondary metering rods; Replaces factory unit for passenger cars; Not intended for engines with RV or performance type camshafts. Fits: Universal (Any Vehicle)   Brand: Jet Performance Part No: J2035001 Retail Price: $579.99  Discount Price: $379.99		Description: MR GASKET SHADOW SERIES SWIVEL SEAL HOSE FITTING, BLACK AND SILVER 90°, -4 AN Size, Cutter Type, Made From Aluminum Material, Can Withstand Up To 1000 Psi, Resistant To Virtually All Automotive Chemicals, For Use With Stainless Steel Braided Hose, With Manufacturer's Limited 90-Day Warranty Fits: Universal (Any Vehicle)   Brand: Mr Gasket Part No: G12F904 Retail Price: $26.75  Discount Price: $11.39
Plymouth Conquest  Fuel Filter		1986 Plymouth Conquest  Oxygen Sensor
Description: K&N GAS FILTER, IN-LINE 1.19 in. body diameter, 2.19 in. overall length, 1.25 in. filter body length; Nylon mesh filter element; A high volume and low pressure in-line gas filter; Ideal for today's dirty gasoline; Easy to clean by simply back flushing. Fits: Universal (Any Vehicle)   Brand: K&N Part No: K33810291 Retail Price: $8.93  Discount Price: $5.74		Description: MATHENY UNIVERSAL OXYGEN SENSOR, UNHEATED, 2-WIRE, SOLD INDIVIDUALLY THIS MATHENY OXYGEN SENSOR FEATURES STAINLESS STEEL SHELL, HEX NUT, SHIELD, TEFLON-COVERED INSULATED WIRES, HIGH-TEMPERATURE RUBBER INTERNAL AND EXTERNAL SEALS, AND THREADED TUBE COATED WITH ANTI-SEIZE COMPOUND. INCLUDES EASY-TO-FOLLOW INSTRUCTIONS. SPECIFICATIONS: 6.3 IN. WIRE LENGTH INCLUDES BUTT TYPE CONNECTORS, WITHOUT PLUG DESIGNED TO FIT SCREW-IN TYPE BUNGS BENEFITS: TESTED TO ENSURE HIGHEST LEVEL OF QUALITY AND RELIABILITY HELPS REDUCE HARMFUL EMISSIONS AND EXTENDS CATALYST LIFE NOTES: MAY NOT BE COMPATIBLE WITH FLANGES. MAY REQUIRE MINOR MODIFICATIONS. Fits: 1986 Plymouth Conquest   Brand: Matheny Part No: MTH259USOS-2000 Retail Price: $38.19  Discount Price: $30.55
1986 Plymouth Conquest  Oxygen Sensor		1986 Plymouth Conquest  Spark Plug
Description: CERTIFIEDXL UNIVERSAL OXYGEN SENSOR, UNHEATED, 1-WIRE, BEFORE CATALYTIC CONVERTER 6.3 in. wire length; Includes butt type connector and easy-to-follow instructions; Without plug; Designed to fit screw-in type bungs; May not be compatible with flanges; May require minor modifications; Quality tested to ensure efficient fuel combustion; A high quality oxygen sensor; Features stainless steel shell, hex nut, shield, Teflon-covered insulated wire, and high-temperature rubber internal and external seals; Helps reduce harmful emissions; With 3 years limited CertifiedXL warranty. Fits: 1986 Plymouth Conquest   Brand: CertifiedXL Part No: CXLUSOS-1000 Retail Price: $33.78  Discount Price: $27.02		Zoom In Description: NGK BPR6EY-11 V-POWER SPARK PLUG, SOLD INDIVIDUALLY NGK V-POWER SPARK PLUG HAS A UNIQUE V-POWER DESIGN THAT DIRECTS THE SPARK TO THE EDGE OF THE ELECTRODE WHERE IT DEVELOPS MORE RAPIDLY TO IMPROVES IGNITABILITY THAN OE MANUFACTURER AND RACER APPROVED. SPECIFICATIONS: 14 MM THREAD SIZE 19 MM REACH 20.6 MM HEX SIZE 0.04 IN. GAP SIZE GASKET SEAT STYLE RESISTOR PLUG TYPE SOLID TERMINAL NUT V-GROOVED CENTERED ELECTRODE PROJECTED TIP JIS HEIGHT FEATURES: INCREASES IGNITABILITY EVEN IN LEAN BURN CONDITIONS AND LOWERS IGNITION SYSTEM VOLTAGE REQUIREMENTS INCREASES FUEL ECONOMY AND LOWER EMISSIONS TRIVALENT METAL PLATING HAS SUPERIOR ANTI-CORROSION AND ANTI-SEIZING PROPERTIES HIGHLY DURABLE AGAINST ELECTRICAL AND CHEMICAL WEAR Fits: 1986 Plymouth Conquest Base: 4Cyl 2.6L   Brand: NGK Part No: NG6261 Retail Price: $4.77  Discount Price: $3.32
1986 Plymouth Conquest  Oxygen Sensor		1986 Plymouth Conquest  Oxygen Sensor
Description: CERTIFIEDXL UNIVERSAL OXYGEN SENSOR, UNHEATED, 2-WIRE 6.3 in. wire length; Includes butt type connectors and easy-to-follow instructions; Without plug; Designed to fit screw-in type bungs; May not be compatible with flanges; May require minor modifications; Quality tested to ensure efficient fuel combustion; A high quality oxygen sensor; Features stainless steel shell, hex nut, shield, Teflon-covered insulated wires, high-temperature rubber internal and external seals, and threaded tube coated with anti-seize compound; Helps reduce harmful emissions; With 3 years limited CertifiedXL warranty. Fits: 1986 Plymouth Conquest   Brand: CertifiedXL Part No: CXLUSOS-2000 Retail Price: $38.19  Discount Price: $30.55		Description: MATHENY UNIVERSAL OXYGEN SENSOR, UNHEATED, 1-WIRE, SOLD INDIVIDUALLY THIS MATHENY OXYGEN SENSOR FEATURES STAINLESS STEEL SHELL, HEX NUT, SHIELD, TEFLON-COVERED INSULATED WIRE, AND HIGH-TEMPERATURE RUBBER INTERNAL AND EXTERNAL SEALS. INCLUDES EASY-TO-FOLLOW INSTRUCTIONS. SPECIFICATIONS: 6.3 IN. WIRE LENGTH INCLUDES BUTT TYPE CONNECTOR, WITHOUT PLUG DESIGNED TO FIT SCREW-IN TYPE BUNGS BENEFITS: TESTED TO ENSURE HIGHEST LEVEL OF QUALITY AND RELIABILITY HELPS REDUCE HARMFUL EMISSIONS AND EXTENDS CATALYST LIFE NOTES: MAY NOT BE COMPATIBLE WITH FLANGES. MAY REQUIRE MINOR MODIFICATIONS. , BEFORE CATALYTIC CONVERTER Fits: 1986 Plymouth Conquest   Brand: Matheny Part No: MTH724USOS-1000 Retail Price: $33.78  Discount Price: $27.02
1986 Plymouth Conquest  Oxygen Sensor		1986 Plymouth Conquest  Oxygen Sensor
Description: UNIVERSAL OXYGEN SENSOR, UNHEATED, 1-WIRE, SOLD INDIVIDUALLY THIS REPLACEMENT OXYGEN SENSOR FEATURES STAINLESS STEEL SHELL, HEX NUT, SHIELD, TEFLON-COVERED INSULATED WIRE, AND HIGH-TEMPERATURE RUBBER INTERNAL AND EXTERNAL SEALS. INCLUDES EASY-TO-FOLLOW INSTRUCTIONS. SPECIFICATIONS: 6.3 IN. WIRE LENGTH INCLUDES BUTT TYPE CONNECTOR, WITHOUT PLUG DESIGNED TO FIT SCREW-IN TYPE BUNGS BENEFITS: TESTED TO ENSURE HIGHEST LEVEL OF QUALITY AND RELIABILITY HELPS REDUCE HARMFUL EMISSIONS AND EXTENDS CATALYST LIFE NOTES: MAY NOT BE COMPATIBLE WITH FLANGES. MAY REQUIRE MINOR MODIFICATIONS. , BEFORE CATALYTIC CONVERTER Fits: 1986 Plymouth Conquest   Brand: Replacement Part No: USOS-1000 Retail Price: $24.89  Discount Price: $19.91		Description: AUTOBODYPARTS UNIVERSAL OXYGEN SENSOR, UNHEATED, 2-WIRE, SOLD INDIVIDUALLY THIS AUTOBODYPARTS OXYGEN SENSOR FEATURES STAINLESS STEEL SHELL, HEX NUT, SHIELD, TEFLON-COVERED INSULATED WIRES, HIGH-TEMPERATURE RUBBER INTERNAL AND EXTERNAL SEALS, AND THREADED TUBE COATED WITH ANTI-SEIZE COMPOUND. INCLUDES EASY-TO-FOLLOW INSTRUCTIONS. SPECIFICATIONS: 6.3 IN. WIRE LENGTH INCLUDES BUTT TYPE CONNECTORS, WITHOUT PLUG DESIGNED TO FIT SCREW-IN TYPE BUNGS BENEFITS: TESTED TO ENSURE HIGHEST LEVEL OF QUALITY AND RELIABILITY HELPS REDUCE HARMFUL EMISSIONS AND EXTENDS CATALYST LIFE NOTES: MAY NOT BE COMPATIBLE WITH FLANGES. MAY REQUIRE MINOR MODIFICATIONS. Fits: 1986 Plymouth Conquest   Brand: AutoBodyParts Part No: ABP152USOS-2000 Retail Price: $38.19  Discount Price: $30.55