 |
| | Description: | MALLORY DISTRIBUTOR CAP, RED
For 6 cylinder applications except semi-even and odd fire engines; Manufactured from innovative space age plastic that combines the high dielectric strength required for today's high-energy ignition systems with highly impact-resistant qualities to prevent damage; Features male/HEI cap style and clamp down cap attachment style; With 1-year Mallory limited warranty. | | Fits: | Universal (Any Vehicle)
| | | | Brand: | Mallory | | Part No: | M11270 | | Retail Price: | $36.49 | | Discount Price: | $24.01 |  |
| | | | Description: | JET PERFORMANCE STAGE 2 QUADRAJET CARBURETOR, REMANUFACTURED
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; 750 CFM; 4 barrel; Single inlet; Spread bore flange style; Divorced choke; Air valve secondary type; Reassembled using the highest quality components with a new float, choke pull-off, and bronze bushed throttle shafts; Casting plugs are sealed with epoxy to prevent leak-down into the intake manifold; All circuits are checked for proper sizing and the calibration is checked for proper jets, primary and secondary metering rods; Features fully recalibrated idle, off idle, main, accelerator pump, and high speed circuits to match any modifications done to the engine; Improved idle quality, instant throttle response, and maximum torque and horsepower for street-strip vehicles, tow vehicles, RV's with modified engines; Replaces factory unit for 1966-1973 GMC and Chevrolet passenger cars or trucks with 305/350/400 c.i. engines with divorced style choke; For gasoline fuel; With Jet Chips' limited 30-day return policy. | | Fits: | Universal (Any Vehicle)
| | | | Brand: | Jet Performance | | Part No: | J2034002 | | Retail Price: | $589.99 | | Discount Price: | $389.99 | |
|
|
|
|
| | Description: | TAYLOR CABLE UNIVERSAL-FIT PRO WIRE IGNITION WIRES, BLACK, SET OF 8
TAYLOR CABLE UNIVERSAL-FIT WIRE SET IS THE STANDARD IN BOTH LOOKS AND PERFORMANCE IN WIRES. UNIVERSAL-FIT WIRES ARE HIGHLY RECOMMENDED FOR EXTREME UNDER HOOD TEMPERATURES AND OPEN WHEEL RACING.
SPECIFICATIONS:- 135 DEGREES PLUG BOOT
- RESISTOR CORE CONDUCTOR STYLE
- INCLUDES BOTH SOCKET STYLE AND HEI DISTRIBUTOR BOOTS WITH APPROPRIATE TERMINAL ENDS
FEATURES:- 2-LAYER INSULATION MADE OF 100 PERCENT SILICONE WITH FIBERGLASS REINFORCED JACKET
- WITHSTANDS TEMPERATURES OF UP TO 600 DEGREES FAHRENHEIT
- EXCLUSIVE LOW PROFILE SILICONE PRO BOOTS FEATURING VIBRATION PROOF DOUBLE SPRING LOCKING SPARK PLUG TERMINALS
| | Fits: | Universal (Any Vehicle)
| | | | Brand: | Taylor Cable | | Part No: | T6470053 | | Retail Price: | $69.23 | | Discount Price: | $53.96 | |
| | | | Description: | JET CHIPS PERFORMANCE PRIMARY CARBURETOR METERING ROD
Stamp 52M; A high quality primary carburetor metering rod; With Jet Chips' limited 30-day return policy. | | Fits: | Universal (Any Vehicle)
| | | | Brand: | Jet Performance | | Part No: | J20201752 | | Retail Price: | $19.95 | | Discount Price: | $14.96 | |
|
|
|
|
| | Description: | MR GASKET PCV GROMMETS, SET OF 2
0.75 in. I.D. x 1 in. O.D.; Molded from neoprene to ensure positive oil seal; Fits most stamped or die cast valve covers. | | Fits: | Universal (Any Vehicle)
| | | | Brand: | Mr Gasket | | Part No: | G126379 | | Retail Price: | $4.52 | | Discount Price: | $2.99 | |
| | | | Description: | MALLORY IGNITION MODULE MOUNT KIT, RUBBER, BLACK, SET OF 4
Number 10 thread, vibration ignition box mount style; Designed to absorb vibration in oval track racing, drag racing, off road, and marine applications. | | Fits: | Universal (Any Vehicle)
| | | | Brand: | Mallory | | Part No: | M1129069 | | Retail Price: | $30.14 | | Discount Price: | $22.15 | |
|
|
|
|
| | Description: | MR GASKET ULTRA-SEAL COLLECTOR AND HEADER MUFFLER GASKET SET
3-bolt holes, 2.75 in. diameter, 3.5 in. bolt circle, 0.375 in. bolt hole; Triangle port; Designed to prevent exhaust leakage between the header and collector flanges; With Mr. Gasket's limited 90-day warranty. | | Fits: | Universal (Any Vehicle)
| | | | Brand: | Mr Gasket | | Part No: | G125970 | | Retail Price: | $14.17 | | Discount Price: | $7.04 | |
| | | | Description: | MALLORY SHOCK MOUNT KIT, SET OF 4
1/4 x 20 thread; Includes hardware; Designed to absorb vibration in oval track racing, drag racing, off road, and marine applications. | | Fits: | Universal (Any Vehicle)
| | | | Brand: | Mallory | | Part No: | M1129070 | | Retail Price: | $31.73 | | Discount Price: | $20.88 | |
|
|
|
|
| | Description: | ACCEL 300+ FERRO-SPIRAL RACE SPARK PLUG WIRES, BLUE, SET OF 8
ACCEL FERRO-SPIRAL RACE SPARK PLUG DELIVERS EXCELLENT ENERGY WHILE PROVIDING THE HIGHEST LEVEL OF RFI/EMI SUPPRESSION. SPECIFICALLY DESIGNED FOR RACE ENGINE CONFIGURATIONS WITH SMALLER WIRE THAT REDUCES WEIGHT AND CAN BE ROUTED AS CLOSE TO THE ENGINE AS POSSIBLE.
SPECIFICATIONS:- 5 MM DIAMETER
- 90 DEGREES
- NON-ASSEMBLED
- RFI SUPPRESSION
- SILICONE DISTRIBUTOR AND SPARK PLUG BOOT MATERIAL
- RED DISTRIBUTOR AND SPARK PLUG BOOT COLOR
- MALE/HEI AND FEMALE/SOCKET DISTRIBUTOR TERMINAL ENDS
- EIGHT 90 DEGREES STRAIGHT SPARK PLUG BOOT ENDS
- SPIRAL CORE CONDUCTOR STYLE
- INCLUDES COIL WIRE
FEATURES:- HEAT, CHEMICAL, AND MOISTURE RESISTANCE
- HIGH DENSITY INSULATION ELIMINATES ARCING
- STAINLESS STEEL TERMINALS FOR MAXIMUM STRENGTH AND CONDUCTIVITY
- SUPERIOR PERFORMANCE WITH 150 OHMS PER FOOT SPIRAL WOUND ALLOY CONDUCTOR CONSTRUCTION
- HIGH GLOSS SILICONE JACKET RATED UP TO 600 DEGREES FAHRENHEIT AND 600 DEGREE DOUBLE SILICONE CONSTRUCTION
DOES NOT INCLUDE COIL WIRE.
| | Fits: | Universal (Any Vehicle)
| | | | Brand: | Accel | | Part No: | A357541B | | Retail Price: | $138.63 | | Discount Price: | $71.42 | |
| | | | Description: | K&N GAS FILTER, IN-LINE
1.19 in. body diameter, 2.19 in. overall length, 1.25 in. filter body length; Nylon mesh filter element; A high volume and low pressure in-line gas filter; Ideal for today's dirty gasoline; Easy to clean by simply back flushing. | | Fits: | Universal (Any Vehicle)
| | | | Brand: | K&N | | Part No: | K33810291 | | Retail Price: | $8.93 | | Discount Price: | $5.74 | |
|
|
|
|
| | Description: | K&N WRENCH-OFF OIL FILTER
THE WRENCH-OFF IS K&N'S PREMIUM AUTOMOTIVE OIL FILTER LINE. IT WAS DESIGNED TO HANDLE HIGH FLOW RATES WHILE MAINTAINING OUTSTANDING OIL FILTRATION. IT WAS BUILT WITH THICK CANISTER WALLS FOR EXTRA STRENGTH AND DURABILITY TO MEET HIGH PERFORMANCE DEMANDS AND REDUCE THE RISK OF DAMAGE FROM LOOSE ROCKS AND DEBRIS. BEST OF ALL, IT WAS DEVELOPED WITH A 1-INCH NUT WELDED TO THE TOP SO IT COULD BE EASILY WRENCHED OFF WITH A STANDARD TOOL.
SPECIFICATIONS- CANISTER TYPE
- 6.51 IN. H
- 2.4 LB W
- 4.62 IN. OD
- 1.5 IN. THREAD ID
FEATURES- EXPOSED NUT DESIGNED FOR EASY REMOVAL
- HEAVY-DUTY CONSTRUCTION
- TRAPS 99% OF HARMFUL CONTAMINANTS
- HIGH FLOW DESIGN HELPS REDUCE ENGINE DRAG
- ANTI-DRAINBACK VALVE TO ELIMINATE DRY STARTS
- LEAK-PROOF DOUBLE ROLL SEAM
- CAN BE USED WITH THE LATEST SYNTHETIC MOTOR OILS
WITH K&N LIMITED WARRANTY.
| | Fits: | Universal (Any Vehicle)
| | | | Brand: | K&N | | Part No: | K33HP5001 | | Retail Price: | $32.10 | | Discount Price: | $27.23 | |
| | | | Description: | TAYLOR CABLE SPLIT LOOM T-KIT, RED
Designed To Accept 1/2 Convoluted Tubing, Includes Special Washers For Use With 3/8 And 1/4 Tubing, Provides Great Custom Fit And Enhances Engine Compartment, With Manufacturer's Limited 90-Day Warranty | | Fits: | Universal (Any Vehicle)
| | | | Brand: | Taylor Cable | | Part No: | T6439120 | | Retail Price: | $7.66 | | Discount Price: | $5.07 | |
|
|
|
|
| | Description: | JET CHIPS PERFORMANCE QUADRAJET PRIMARY CARBURETOR JET
Size 0.077; A high quality Quadrajet primary carburetor jet. | | Fits: | Universal (Any Vehicle)
| | | | Brand: | Jet Performance | | Part No: | J20201077 | | Retail Price: | $8.95 | | Discount Price: | $6.71 | |
| | | | Description: | MATHENY ACCESSORY BELT TENSIONER PULLEY
2.76 in. OD; 0.67 in. ID; 1.14 in. W; Flat; Serpentine type; With steel flange; A high quality, OE replacement accessory belt tensioner pulley; With 1-year limited Matheny warranty. | | Fits: | 2006 Dodge Sprinter 2500
Base: 5Cyl 2.7L | | | | Brand: | Matheny | | Part No: | MTH165REPV315401 | | Retail Price: | $10.29 | | Discount Price: | $8.23 | |
|
|
|
|
| | Description: | PROZONE ACCESSORY BELT TENSIONER PULLEY, STEEL
2.76 in. OD; 0.67 in. ID; 1.14 in. W; Flat; Serpentine type; Without flange; A high quality, direct fit OE replacement accessory belt tensioner pulley; With 18 months limited Prozone warranty. | | Fits: | 2006 Dodge Sprinter 2500
Base: 5Cyl 2.7L | | | | Brand: | Prozone | | Part No: | PZNREPV315401 | | Retail Price: | $10.29 | | Discount Price: | $8.23 | |
| | | | Description: | ACCESSORY BELT TENSION PULLEY
| | Fits: | 2006 Dodge Sprinter 2500
Base: 5Cyl 2.7L | | | | Brand: | Garage-Pro | | Part No: | JCWREPV315401GP | | Retail Price: | $10.29 | | Discount Price: | $8.23 | |
|
|
|
|
| | Description: | ACCESSORY BELT TENSIONER PULLEY
2.76 in. OD; 0.67 in. ID; 1.14 in. W; Flat; Serpentine type; With steel flange; A high quality, OE replacement accessory belt tensioner pulley; Backed by 1-year, unlimited-mileage warranty. | | Fits: | 2006 Dodge Sprinter 2500
Base: 5Cyl 2.7L | | | | Brand: | Replacement | | Part No: | REPV315401 | | Retail Price: | $6.39 | | Discount Price: | $5.11 | |
| | | | Description: | LAVERNE COX AUTO PARTS ACCESSORY BELT TENSIONER PULLEY
2.76 in. OD; 0.67 in. ID; 1.14 in. W; Flat; Serpentine type; With steel flange; A high quality, OE replacement accessory belt tensioner pulley; With 1-year limited Laverne Cox Auto Parts warranty. | | Fits: | 2006 Dodge Sprinter 2500
Base: 5Cyl 2.7L | | | | Brand: | Laverne Cox Auto Parts | | Part No: | LCA188REPV315401 | | Retail Price: | $10.29 | | Discount Price: | $8.23 | |
|
|
|
|
| | Description: | TRUSTBUILT ACCESSORY BELT TENSIONER PULLEY, STEEL
2.76 in. OD; 0.67 in. ID; 1.14 in. W; Flat; Serpentine type; Without flange; A high quality, direct fit OE replacement accessory belt tensioner pulley; With 2 years limited Trustbuilt warranty. | | Fits: | 2006 Dodge Sprinter 2500
Base: 5Cyl 2.7L | | | | Brand: | TrustBuilt | | Part No: | TBTREPV315401 | | Retail Price: | $10.29 | | Discount Price: | $8.23 | |
| | | | Description: | MARTINS ACCESSORY BELT TENSIONER PULLEY
2.76 in. OD; 0.67 in. ID; 1.14 in. W; Flat; Serpentine type; With steel flange; A high quality, OE replacement accessory belt tensioner pulley; With 1-year limited Martins warranty. | | Fits: | 2006 Dodge Sprinter 2500
Base: 5Cyl 2.7L | | | | Brand: | Martins | | Part No: | MRT853REPV315401 | | Retail Price: | $10.29 | | Discount Price: | $8.23 | |
|
|
|
