2004 Jaguar X-TYPE Brakes, Suspension & Steering Category

• 5 X 108 MM BOLT PATTERN
• 280 MM DISC DIAMETER
• 13.5 MM BOLT SIZE
• 10 MM MINIMUM THICKNESS

• MANUFACTURED TO MEET QS AND ISO QUALITY SYSTEM STANDARDS
• UTILIZES AN ELECTROCOATING FINISH THAT PROVIDES LONG LASTING CORROSION PROTECTION
• DESIGNED TO WITHSTAND 400 HOURS OF SALT WATER EXPOSURE WITHOUT RUSTING
• DOUBLE DISC GRINDING ENSURES PARALLELISM, ELIMINATES RUN OUT, AND PROVIDES NEAR PERFECT DISC THICKNESS
• THE DOUBLE DISC GRINDING ALSO LEAVES A NON-DIRECTIONAL FINISH ON THE FRICTION SURFACE AREA FOR MORE EFFECTIVE PAD-DISC BREAK IN WHILE PROVIDING QUIETER AND SMOOTHER STOPS
• CENTER-SPLIT CORE CASTING OFFERS PROPER HEAT TRANSFER AND THERMAL EFFICIENCY FOR SUPERIOR BRAKING AND SAFETY
• 100 PERCENT FULLY MACHINED HAT DELIVERS BETTER DISC BALANCE
• MILL-CORRECTED TO A TOLERANCE OF LESS THAN 2 OZ. PER INCH

• 5 X 4.25 IN. BOLT PATTERN
• 11.81 IN. OUTER DIAMETER
• 0.54 IN. BOLT SIZE
• 0.87 IN. MINIMUM THICKNESS

• VENTED CONSTRUCTION

A HIGH QUALITY, OE REPLACEMENT BRAKE DISC. THIS REPLACEMENT BRAKE DISC IS MADE FROM PREMIUM MATERIAL FOR OPTIMUM DISC WEAR AND MANUFACTURED TO OE COMPARABLE DESIGN, FIT AND SPECIFICATIONS FOR BALANCE AND RELIABILITY.

SPECIFICATIONS:

• 5 X 4.25 IN. BOLT PATTERN
• 2.5 IN .INNER DIAMETER
• 11.01 IN. OUTER DIAMETER
• 0.53 IN. BOLT SIZE
• 0.39 IN. MINIMUM THICKNESS

• 5 X 4.25 IN. BOLT PATTERN
• 11.02 IN. OUTER DIAMETER
• 0.53 IN. BOLT SIZE
• 0.39 IN. MINIMUM THICKNESS

• 5 X 4.25 IN. BOLT PATTERN
• 11.81 IN. OUTER DIAMETER
• 0.54 IN. BOLT SIZE
• 0.87 IN. MINIMUM THICKNESS

• VENTED CONSTRUCTION; THE SET OF VANES PUMP AIR THROUGH THE DISC TO PROVIDE COOLING
• RUN COOLER AND ARE ESSENTIAL FOR COMPETITION CARS OR ANY VEHICLE WHERE DEPENDABLE PERFORMANCE IS VERY IMPORTANT

A HIGH QUALITY, OE REPLACEMENT BRAKE DISC. THIS PROPONE BRAKE DISC IS MADE FROM PREMIUM MATERIAL FOR OPTIMUM DISC WEAR AND MANUFACTURED TO OE COMPARABLE DESIGN, FIT AND SPECIFICATIONS FOR BALANCE AND RELIABILITY.

SPECIFICATIONS:

• 5 X 4.25 IN. BOLT PATTERN
• 2.5 IN .INNER DIAMETER
• 11.01 IN. OUTER DIAMETER
• 0.53 IN. BOLT SIZE
• 0.39 IN. MINIMUM THICKNESS

THESE PRODUCTS ARE COVERED WITH 18 MONTHS LIMITED PROZONE WARRANTY!

A HIGH QUALITY, OE REPLACEMENT BRAKE DISC. THIS TRUSTBUILT BRAKE DISC IS MADE FROM PREMIUM MATERIAL FOR OPTIMUM DISC WEAR AND MANUFACTURED TO OE COMPARABLE DESIGN, FIT AND SPECIFICATIONS FOR BALANCE AND RELIABILITY.

SPECIFICATIONS:

• 5 X 4.25 IN. BOLT PATTERN
• 2.5 IN .INNER DIAMETER
• 11.01 IN. OUTER DIAMETER
• 0.53 IN. BOLT SIZE
• 0.39 IN. MINIMUM THICKNESS

THESE PRODUCTS ARE COVERED WITH 2 YEARS LIMITED TRUSTBUILT WARRANTY!

A HIGH QUALITY, OE REPLACEMENT BRAKE DISC. THIS CERTIFIEDXL BRAKE DISC IS MADE FROM PREMIUM MATERIAL FOR OPTIMUM DISC WEAR AND MANUFACTURED TO OE COMPARABLE DESIGN, FIT AND SPECIFICATIONS FOR BALANCE AND RELIABILITY.

SPECIFICATIONS:

• 5 X 4.25 IN. BOLT PATTERN
• 2.5 IN .INNER DIAMETER
• 11.01 IN. OUTER DIAMETER
• 0.53 IN. BOLT SIZE
• 0.39 IN. MINIMUM THICKNESS

THESE PRODUCTS ARE COVERED WITH 3 YEARS LIMITED CERTIFIEDXL WARRANTY!

• 5 X 108 MM BOLT PATTERN
• 300 MM DISC DIAMETER
• 13.75 MM BOLT SIZE
• 22 MM MINIMUM THICKNESS

• MANUFACTURED TO MEET QS AND ISO QUALITY SYSTEM STANDARDS
• UTILIZES AN ELECTROCOATING FINISH THAT PROVIDES LONG LASTING CORROSION PROTECTION
• DESIGNED TO WITHSTAND 400 HOURS OF SALT WATER EXPOSURE WITHOUT RUSTING
• DOUBLE DISC GRINDING ENSURES PARALLELISM, ELIMINATES RUN OUT, AND PROVIDES NEAR PERFECT DISC THICKNESS
• THE DOUBLE DISC GRINDING ALSO LEAVES A NON-DIRECTIONAL FINISH ON THE FRICTION SURFACE AREA FOR MORE EFFECTIVE PAD-DISC BREAK IN WHILE PROVIDING QUIETER AND SMOOTHER STOPS
• CENTER-SPLIT CORE CASTING OFFERS PROPER HEAT TRANSFER AND THERMAL EFFICIENCY FOR SUPERIOR BRAKING AND SAFETY
• 100 PERCENT FULLY MACHINED HAT DELIVERS BETTER DISC BALANCE
• MILL-CORRECTED TO A TOLERANCE OF LESS THAN 2 OZ. PER INCH

• 5 LUGS
• 11.81 IN. DISC DIAMETER

• MANUFACTURED TO OE SPECIFICATIONS USING HIGH TENSILE STRENGTH G3000 GRAY CAST IRON
• PRECISION MACHINED, BALANCED, AND 100 PERCENT ONE BY ONE RUN OUT INSPECTED TO GUARANTEE ZERO ROTOR DISTORTION OUT OF THE BOX

• ASBESTOS-FREE
• VEHICLE-OPTIMIZED EUROPEAN FORMULATION PROVIDES SUPERIOR PERFORMANCE
• HARMONICALLY DAMPED, CHAMFERED, SLOTTED, AND SHIMMED FOR NVH CONTROL
• CAUSES ONLY MINIMAL ROTOR WEAR TO PROLONG ROTOR LIFE
• BACKING PLATES ARE POWDERCOATED FOR CORROSION RESISTANCE
• INCLUDES HIGH-TEMPERATURE RESISTANT MOLY LUBE

• USES FINE BLANK BACKING PLATES FOR CORRECT CALIPER FITMENT, EVEN PAD WEAR, AND CONSISTENT STOPPING POWER
• NOTCHED FOR SHIMS
• 100 PERCENT POSITIVE MOLDED FOR CONSTANT MATERIAL DENSITY ALL THROUGHOUT THE PADS
• MANUFACTURED IN ACTUAL OEM SUPPLIER PLANTS USING OEM PROCESSES, MATERIALS AND PROCEDURES

• ASBESTOS-FREE
• SEMI-METALLIC FRICTION FORMULATION
• PRECISION CUT OR SHAVED BACKING PLATES WITH MECHANICALLY ATTACHED AND APPLICATION SPECIFIC SHIMS THAT PROVIDE SUPERIOR NOISE ABATEMENT
• POSITIVELY MOLDED AND SCORCHED TO ENHANCE CONSISTENT FRICTION PERFORMANCE ACROSS A WIDE TEMPERATURE RANGE
• OFFERS OE PERFORMANCE AT AN AFFORDABLE COST

• MANUFACTURED FROM A NON-METALLIC COMPOUND WITH ARAMID SOFT FIBERS
• WITH CENTER SLOTS AND EDGE CHAMFERS PLUS NOISE REDUCTIONS SHIMS ON THE REVERSE
• PAINTED WITH EBC RED BRAKE-IN SURFACE COATING CONDITIONS ROTORS AFTER INSTALLATION THAT HELPS QUICKLY DELIVER STOPPING POWER ON THE NEW PADS
• HARDWARE AND WEAR LEADS INCLUDED WHERE FITTED AS STANDARD BY FACTORY
• LONG LASTING HIGH FRICTION PAD DESIGNED FOR NON-SPORT URBAN DRIVING ON ALL SEDANS, SUVS, AND LIGHT TRUCKS

• ASBESTOS-FREE
• MADE FROM A INNOVATIVE BLEND OF KEVLAR FIBERS AND ENHANCED CERAMIC PARTICLES
• PRODUCES 60-90 PERCENT LESS DUST THAN OE PADS
• BRAKE BITE FROM COLD IS AS GOOD AS OE OR BETTER
• BRAKE PERFORMANCE ONLY INCREASES AS THE PADS HEAT UP
• BUILT WITH SHIMS, SLOTS, AND CHAMFERS FOR SILENT BRAKING
• COATED WITH BRAKE-IN COMPOUND FOR FASTER BREAK-IN AND GREATER INITIAL BRAKING EFFECT